Verzia pre tlač

Odporučiť priateľovi

HM Digital DM-2 Commercial In-Line Dual TDS Monitor, 0-9990 ppm Range, +/- 2% Readout Accuracy :: Hodnotenia

HM Digital DM-2 Commercial In-Line Dual TDS Monitor, 0-9990 ppm Range, +/- 2% Readout Accuracy

FEATURES

Highly efficient and accurate due to its advanced microprocessor technology
Displays TDS levels of the Feed Water and Product Water with in & out electrode probes
Auto-Off function conserves battery power (Shuts off automatically after 3 minutes)
Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. The DM-2 features digital calibration
Diagnostic error messaging
Shielded sensor cables
Comes equipped with two 1/4 inch T-fittings (Also available with 3/8″ or 1/2″ fittings)

SPECIFICATION

- Range: 0-9990 ppm Dual Range – Measures from 0-999 ppm, with a resolution of 1 ppm. From 1000 to 9990 ppm, the resolution is in 10 ppm increments, indicated by a blinking ‘x10’ image.
- Accuracy: ±2%
- Conversion Factor: NaCl (avg. 0.5)
- Cable Length: 46″ (including sensor), shielded cables
- Sensor: Dual, 1/4″ diameter for quick-connect fittings (model SP-3, included)
- Digital Calibration: Digitally factory calibrated to NaCl 342 ppm. Re-calibration can be done separately for each line.
- Power source: 2 x AA batteries (included)
- Battery life: Approx. 2 years
- Size: 11.6 x 6.8 x1.8 cm (4.6 x 2.6 x .7in.)
- Weight: 201.3 g (7.1 oz.)

Kliknite sem pre väčší obrázok

HM_Digital_DM-2_Commercial_In-Line_Dual_TDS_Monitor_1.png

Hodnotiť

Nájdený: 0

Žiadne hodnotenia nenájdené

Ask a Question

Nájdený: 0

Žiadne otázky neboli nenájdené

Naposledy prezerané

-->

ViArt Shopping Cart